Flux Core Welding Wire E501T-1, E71T-1

porducts list

Welding Wires [7]

contact datails

Changzhou Ruite Metal Welding Wires Co.,Ltd.

0086-519-85863058

Larger photo of Flux Core Welding Wire E501T-1, E71T-1

Flux Core Welding Wire E501T-1, E71T-1


company	Changzhou Ruite Metal Welding Wires Co.,Ltd.
Categories	Welding Wires
Update	2010-12-30
Original Region	China
prev 1 2 3 4 5 6 7 next

Flux Core Welding Wire E501T-1, E71T-1

CO₂ is the use of titanium-based flux-cored wire welding. Deposited efficient performance of all-position welding process better, legislation can also be welded down. Applicable to ships, pressure vessels, mechanical equipment, steel bridges, such as low carbon steel and 490MPa high strength steel welding class.
Standard:
GB/T：E501T-1
AWS：E71T-1

chemical composition of welding wire(%)	C	Mn		Si		P		S
	≤0.10	≤1.75		≤0.75		≤0.03		≤0.03
Mechanical Properties or Deposited Metal	Yield strength_0.2(Mpa)		Tensile strength_b(Mpa)		Elongation₅(%)		AKV impact(J)
	≥400		≥480		≥22		≥47(0℃)		≥47(-20℃)

Wire Size(mm)	1.0	1.2	1.4	1.6	Welding position
Welding current(A)	80~250	120~300	160~400	190~450
Please be noted:	Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.Before welding please clean out the oil,rust,water etc from the work parts 3.The protection of the use of CO₂ gas, CO₂ gas purity of 99.98%. 4.CO₂ welding to protect the flow of gas should be controlled in 20-25L/min. 5.Extend the length of the wire should be controlled in the range of 15-25mm. 6.Preheating before welding to 150-300 ℃, PWHT 700-740tempered by the need to deal with.

Products Showcase

See more products from this supplier.

提交网站发布产品

Do you want to show products of your own company? Join FREE now!

GAS Shielded Welding Wire Gas shielded wire 0.6mm

GAS Shielded Welding Wire ER49-1

GAS Shielded Welding Wire ER70S-6

Submerged arc welding wire H10MnSi(EM13K)

Submerged arc welding wire H08MnA(EM12)

Submerged arc welding wire H08A(EL12)